Guest Max Posted June 27, 2010 Share Posted June 27, 2010 OOOOOH nice comment, any ideas on some keywords for googling this to find the bits? Quote Link to comment Share on other sites More sharing options...
Guest Max Posted June 28, 2010 Share Posted June 28, 2010 Would put good money on that being a rs1700T kit. Think people still produce this kit so you may be able to get the matching front and rear bumpers if your lucky just looked up rs1700T kit on google and its not the same, dont spose you have any more ideas do you? thanks Quote Link to comment Share on other sites More sharing options...
Guest r1cky Posted June 28, 2010 Share Posted June 28, 2010 its very close looking to the f40 kit might be able to use the bumpers off that kit Quote Link to comment Share on other sites More sharing options...
Guest Max Posted July 4, 2010 Share Posted July 4, 2010 Back again for day 5, basically the car still looks the same as last week as i spent all day filling, rubbing down and filling again making the rear quarters look like they are ment to be on this car, we did make one important descision this week and that was that the front panel was too far gone to save, so out with the grinder ready for a new one to be fitted....... Quote Link to comment Share on other sites More sharing options...
Guest Max Posted July 30, 2010 Share Posted July 30, 2010 Wow, long time no see, sorry comp was on the fritz but its up and running again now..... here are the next load of installments you have been missing, starting with the new front end Quote Link to comment Share on other sites More sharing options...
Guest Max Posted July 30, 2010 Share Posted July 30, 2010 ok this lot are finally getting the last of the kit attached.... Quote Link to comment Share on other sites More sharing options...
Guest spenny Posted July 30, 2010 Share Posted July 30, 2010 looking good mate you done a good job with that kit .. lookin forward to seeing it finished Quote Link to comment Share on other sites More sharing options...
Guest Max Posted July 30, 2010 Share Posted July 30, 2010 And now for something a little different,the start of my home made bumper...... think i have sourced something i can use for the front but the back is going to be a little more 'hand crafted', bear with me, i think this might just work..... Quote Link to comment Share on other sites More sharing options...
gingergman Posted July 30, 2010 Share Posted July 30, 2010 looking good mate, its starting to take shape, good luck with the bumpers! Quote Link to comment Share on other sites More sharing options...
MarineIguana Posted July 30, 2010 Share Posted July 30, 2010 Nice to see some progress Quote Link to comment Share on other sites More sharing options...
gingergman Posted August 26, 2010 Share Posted August 26, 2010 any updates mate? Quote Link to comment Share on other sites More sharing options...
Guest Max Posted August 29, 2010 Share Posted August 29, 2010 Hi im back again just recovering from an eye injury, got some more progress for you and hope to be back working on it next week at double pace to make up for lost time.... Quote Link to comment Share on other sites More sharing options...
Guest Max Posted August 29, 2010 Share Posted August 29, 2010 and some more and you can now see my £25 e-bay front bumper bargain ...... i have another lot of photots to put up once i can get them on to my comp Quote Link to comment Share on other sites More sharing options...
gingergman Posted August 30, 2010 Share Posted August 30, 2010 good ole fibreglass nice one for the pics Quote Link to comment Share on other sites More sharing options...
LeeMcCarthy Posted August 30, 2010 Share Posted August 30, 2010 thats going to look one mean cab when finished Quote Link to comment Share on other sites More sharing options...
MarineIguana Posted August 30, 2010 Share Posted August 30, 2010 Can't wait to see this when it's finished Quote Link to comment Share on other sites More sharing options...
Guest hendo_lawdy Posted October 13, 2010 Share Posted October 13, 2010 im loveing the kit whats the kit look like finished ? Quote Link to comment Share on other sites More sharing options...
Guest Max Posted January 9, 2014 Share Posted January 9, 2014 Ok people im getting this dusty old thread active again, as you can see i started this project some time ago and then it all went quiet. i started out with some bad health which stopped progress for a few months, then the garage it was stored at moved premises so the car had to come home, then i was made redundant then then then, i could keep going but you get the idea. this car has been sitting in my garden for quite some time now doing nothing and as i dont earn enough now or for the forseeableto continue with it i need to shift it. its not something i have wanted to do ever, as i wanted to finish it, even when we were close to losing the house while i was out of work i refused to lose her, but its now with a tear in my eye, i realise i have to let her go. she was running nice up to the point i took her in for a new roof (which i never got) which i when i decided to go all mental with the body kit etc. if nothing else she is full of parts if you wanted to strip her down, or she could be completed, i have the seats indoors so the are not mouldy. im open to all offers, if shes not taken she will be stripped to bits then sold or scrapped, surely someone will help me stop this from happening? call me 07801741159 to discuss, im in colchester essex and you would need to collect. if a moderator can move thsi thread somewhere more appropriate or whatever that would be smashing Quote Link to comment Share on other sites More sharing options...
Guest Max Posted January 12, 2014 Share Posted January 12, 2014 is there no one who would want this? Quote Link to comment Share on other sites More sharing options...
Guest Max Posted January 18, 2014 Share Posted January 18, 2014 someone must want this even if its just for the parts to save it being collected by the local scrap man? the engine, loom and everything were fine. i just need it gone someone, anyone with a vision or in need of lots of parts? Quote Link to comment Share on other sites More sharing options...
Admin Ollie Posted January 18, 2014 Admin Share Posted January 18, 2014 max can you get some updated pics for us of how it sits now thanks ollie Quote Link to comment Share on other sites More sharing options...
Guest Max Posted January 19, 2014 Share Posted January 19, 2014 ok well its not an easy thing to photo at the moment, you can see from the earlier pics how it was going, the rear bumper was all filled and rubbed down and i was working on the custom lights. you can see them on the attached image sort of, but i cant really get the car out for any more photos without a lot of effort. Full page photo.pdf Quote Link to comment Share on other sites More sharing options...
Guest Max Posted January 19, 2014 Share Posted January 19, 2014 i dont know what i done there, but if you click the link you do see the photo lol Quote Link to comment Share on other sites More sharing options...
gingergman Posted January 19, 2014 Share Posted January 19, 2014 Don't work for me Quote Link to comment Share on other sites More sharing options...
Guest GINGExR2T Posted February 9, 2014 Share Posted February 9, 2014 . Just for info, that kit is a Warrior kit, Looked or one for a while for my rwd cossie Mk4 ERST. There like rocking horse shit to find :-( Ginger . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.