StuDaBear Posted February 20, 2017 Author Share Posted February 20, 2017 I got a genuine Girling master cylinder Lee, 0.625 size. Quote Link to comment Share on other sites More sharing options...
StuDaBear Posted February 20, 2017 Author Share Posted February 20, 2017 (edited) Most if the gear change conversion done now, bit of paint on any exposed metal and it can all be bolted together, then I can see what's gonna need doing to the centre console. I'm making a plate from the aluminium for on the underside where the cables pass through. Edited February 20, 2017 by StuDaBear Quote Link to comment Share on other sites More sharing options...
RScab Posted February 20, 2017 Share Posted February 20, 2017 Getting there Stu Quote Link to comment Share on other sites More sharing options...
StuDaBear Posted February 26, 2017 Author Share Posted February 26, 2017 Today I had a bit of free time so have been doing a bit of spraying. All these little bits need doing and I need to get stuck into it all. Off over to Birkenhead this week one evening to get my new upper sump modified for oil returns and breather return. Quote Link to comment Share on other sites More sharing options...
StuDaBear Posted April 3, 2017 Author Share Posted April 3, 2017 New upper and lower sumps are fitted, new timing belt kit, various other bits have been painted, starter motor is in position, bit of electrical work to carry out. Plenty to be on with while I wait for some other parts. Quote Link to comment Share on other sites More sharing options...
StuDaBear Posted October 12, 2017 Author Share Posted October 12, 2017 That's a sneak preview of the new manifold. Quote Link to comment Share on other sites More sharing options...
RScab Posted October 13, 2017 Share Posted October 13, 2017 Lookin great Stu Quote Link to comment Share on other sites More sharing options...
StuDaBear Posted October 13, 2017 Author Share Posted October 13, 2017 Lookin great Stu Cheers Dennis, I'm today told the manifold is almost finished so I might have some more photos soon with the turbo in place etc. Quote Link to comment Share on other sites More sharing options...
StuDaBear Posted October 14, 2017 Author Share Posted October 14, 2017 Bit more to see of the manifold and where the turbo is going to be. Quote Link to comment Share on other sites More sharing options...
StuDaBear Posted October 21, 2017 Author Share Posted October 21, 2017 This is the start of the exhaust, this is 3" bore to allow for more power in the future if its required. New upper boost pipe being made. Quote Link to comment Share on other sites More sharing options...
Ian71 Posted October 22, 2017 Share Posted October 22, 2017 Nice work stu,think you might need four wheel drive for the beast lol Quote Link to comment Share on other sites More sharing options...
StuDaBear Posted October 22, 2017 Author Share Posted October 22, 2017 Manifold is officially finished. Quote Link to comment Share on other sites More sharing options...
RScab Posted October 22, 2017 Share Posted October 22, 2017 I can see that glowing red before to long Stu lol Quote Link to comment Share on other sites More sharing options...
StuDaBear Posted October 23, 2017 Author Share Posted October 23, 2017 I can see that glowing red before to long Stu lol I hope not Dennis, I'm going to wrap the section after the merge collector to protect the clutch hydraulics. Quote Link to comment Share on other sites More sharing options...
RScab Posted October 23, 2017 Share Posted October 23, 2017 Behave Stu: - the only way thats not goin to glow Red is if yeah have right foot amputated PMSL Quote Link to comment Share on other sites More sharing options...
StuDaBear Posted October 24, 2017 Author Share Posted October 24, 2017 Got to build them to drive them Dennis, no point leaving it tucked away doing nothing. Bit more progress. So that's the 3" down pipe, then its dropping back to 2.5" Quote Link to comment Share on other sites More sharing options...
RScab Posted October 25, 2017 Share Posted October 25, 2017 What do you mean "no point leaving it tucked away doing nothing" Am letting the appreciation value go up first before I start lol Quote Link to comment Share on other sites More sharing options...
StuDaBear Posted October 26, 2017 Author Share Posted October 26, 2017 What do you mean "no point leaving it tucked away doing nothing" Am letting the appreciation value go up first before I start lol I don't mean you personally, cars need using is my point. Manifold and Turbo support bracket made up now. Quote Link to comment Share on other sites More sharing options...
StuDaBear Posted November 10, 2017 Author Share Posted November 10, 2017 Cabrio is back with me but then 2 days later this arrive so I might be busy for a bit yet. Quote Link to comment Share on other sites More sharing options...
RScab Posted November 11, 2017 Share Posted November 11, 2017 Congratulations to you both ENJOY Quote Link to comment Share on other sites More sharing options...
Admin Ollie Posted November 14, 2017 Admin Share Posted November 14, 2017 nice work stu :>) congrats on the new arrival .... good excuse to get out the house for an hour lol Quote Link to comment Share on other sites More sharing options...
StuDaBear Posted February 13, 2018 Author Share Posted February 13, 2018 (edited) Edited February 13, 2018 by StuDaBear Quote Link to comment Share on other sites More sharing options...
RScab Posted February 14, 2018 Share Posted February 14, 2018 Good to see it running again Stu Quote Link to comment Share on other sites More sharing options...
StuDaBear Posted February 14, 2018 Author Share Posted February 14, 2018 Cheers Dennis, got a few bits to tidy before it comes off axle stands, I've booked it in for a MOT so that will keep me motivated. Quote Link to comment Share on other sites More sharing options...
Ian71 Posted February 14, 2018 Share Posted February 14, 2018 About time to ! Don't know it's taken so long. (Lol) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.