Jump to content
Escort Cabriolet Club

Paul

Admin
 View Profile  See their activity

  • Posts

    2,057

  • Joined

  • Last visited

  • Days Won

    5

 Content Type 

Everything posted by Paul

  1. Paul
    Hi, do i need 2 or 4 wheel drive cossi brakes for the front? single or 4 pot? Paul
  2. Paul
    Can anyone tell me the differences between MFI and EFI relays, Noticed that on EFI the fuel pump relay is not pink, also i seem to have a 6 pin hella relay (poss flasher unit) that i have no efi wiring for? Paul
  3. Paul
    Can anyone tell me which order the 4 relays under the dash should live?
  4. Paul
    Will be sent out on Monday via recorded del. Paul
  5. Paul
    No get Caz to pump the brakes several times, this will build up pressure in the system. On the 7th time hold pedal down and then undo nipple. Let air escape and then close nipple. Then do it all over again. Paul
  6. Paul
    no need to touch bias valve, also throw the easybleed kit in the bin they cause more air to get back into the system then anything.........
  7. Paul
    I had the same problem Neil, and you do need to bleed all corners in that order and this will solve your problems. Bleed with engine off and cap off res. Pump the pedal several times and while holding pedal down get someone to open bleed screw. Do this until all air has gone. Just keep an eye on the res and keep it topped up while doing it. If you have done it right your right leg will be hurting lol
  8. Paul
    There you go, will be the same
  9. Paul
    What make are they? If you go to EBC website there is a picture under FAQ and shows you the ebc patten. Should be the same. Paul
  10. Paul
    Its a big job mate changing EFI to MFI lol, loom etc may as well stick a EFI Turbo lump in Paul
  11. Paul
    Havent got the bill yet mate!!
  12. Paul
    The extreme chrome powder coating costs approx £50 per litre and it needed 3/4 plus sand blasting and re powder coating I know but once its done its done for good lol
  13. Paul
    Ok during the break, went to pick up my gearbox housing which Colin (Performance Polishing) has been working on. It has been finished in Extreme Chrome powder coating.................Dropped off at my Gearbox man today for rebuild
  14. Paul
    Ok car is back in my garage with its new lick of paint in the engine bay,
  15. Paul
    no mate you are right lol
  16. Paul
    sorry guys you are right g its pink
  17. Paul
    Right just got back from workshop, car is ready for primer. All rubbed down and masked off and rust that was there has been sorted. Re wraped the underneath of the car so no paint can blow under. Will be primed this afternoon
  18. Paul
    Just a quick update, engine is back from the engine shop so we have had to get a move on with the engine bay paint work, spent most of the day doing the prep work:-
  19. Paul
    yep give ya that one
  20. Paul
    You owe me £20 for Ireland maps!!!!!!!!!! Puff, even??
  21. Paul
    Car gone to paint shop to have engine bay and front arches re painted
  22. Paul
    battery tray,
  23. Paul
    Andy going to be pleased....look what i did today!!
  24. Paul
    too much mate, will calculate it at the end but i recon about £6000- £7000
  25. Paul
    Decided to get the engine bay sprayed, gone this far seems pointless not to. Any ideas what can be left in, ie master cylinder etc.... Paul
×
×
  • Create New...