Jump to content
Escort Cabriolet Club

Mk4 Efi Project Non-stop Repairs


Guest Orais
 Share

Recommended Posts

Guest Orais

I brought my XR3i in April 2008 and it was in total working order , when having a look around and after test driving it,or so i thought !

 

So about 1 week later while my fiancee was driving the car and the front left CV joint went with no warning apprentaly !

 

So we replaced th CV joint and got her mobile again, then after about a month coming back from a drive to the coast the gearbox decided to start clonking 5miles from home then about about 200yrds from home it completely went. No gears nothing !!!

 

So we pushed her home up the slight hill near ours and into the back garden where it stood for the next few weeks! We stripped down the engine and replaced gearbox clutch and clutch release bearing kit.

 

Dave and myself decide to have a proper look at every single thing on the car including fuel lines and inside the fuel tank !!!

 

Now i was starting to wonder what i have brought, so while we stripped the engine and gearbox down we started finding wires held together with cheap bullet connectors hidden with black tape, even in the fuel tank ! :huh:

 

There will be pics uplaoded asap havin trouble locating them on my PC again been keeping a book on what been happen stage by stage so thought i would start to up load it to sight as i might take me a while !!

Link to comment
Share on other sites

Guest Orais

This is the car before she started playin the night i got her home from pickin her up!!

PIC_0647.jpg

PIC_0648.jpg

Photo-0074.jpg

 

 

Now then where to start with problems ok i have no pictures of us doing the CV joint but have a few on us with engine in peices with out engine hoist but used 4x4 timber instead as couldnt get hold of one or hire one in for a week!!

Photo-0128.jpg

Photo-0140.jpg

Photo-0123.jpg

Photo-0137.jpg

Edited by Orais
Link to comment
Share on other sites

Guest Orais

ok that last picture shud be this way round!

this was a safety issue we had with alot of tools being missin or stolen from when garage was broken into trolley jack bein a main item! I dont reckonmend doin this by any means :S

Photo-0137-1.jpg

 

While the Front bumper was off we decided to repair and remove as much rust as possible with out gettin a new front panel!

 

Photo-0124.jpg

Photo-0125.jpg

Photo-0126.jpg

Photo-0127.jpg

 

As in this picture the left hand side has had someslight work done to it!

Photo-0128.jpg

Link to comment
Share on other sites

  • 1 month later...
Guest murcus

New front panel & cross member would make a massive difference M8.

agreed, it would look alot better and would stiffen up the front a bit as well Edited by murcus
Link to comment
Share on other sites

Unfortuantly i have now ran out of money and time for my cab after she faid M.O.T on high emissions and cant afford to get her running so is now up for offers!! selling as spares or repair!! make an offer and ill try get back to you!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...