welshlad Posted October 9, 2017 Share Posted October 9, 2017 Hi guys, no posts for a while as ive got twin baby girls lol Problem I've got is before I put my car away in my garage I changed the clutch quadrant for a new one and a new cable, and due to problems fitting the cable I just left it. I know I have washers and clips in the footwell and were they go I can't remember lol. So has anyone got a diagram of the clutch/brake peddles etc? I might have to pull the rod out of both just to fit the cable too I think 😐 Thanks guys Quote Link to comment Share on other sites More sharing options...
StuDaBear Posted October 12, 2017 Share Posted October 12, 2017 Rod shouldn't have to come out to fit the cable mate, I will check my phone as I'm sure I took pictures of mine when I had it in bits for the hydraulic conversion. Quote Link to comment Share on other sites More sharing options...
StuDaBear Posted October 12, 2017 Share Posted October 12, 2017 I've a couple of pics that might be of help. Are you on Facebook? Quote Link to comment Share on other sites More sharing options...
Paul Grainger Posted October 15, 2017 Share Posted October 15, 2017 Washers left over is never a good thing. You will need to slide the rod out again to put them back in. Without them the plastic bearings will pop out the pedal when you press it. Once built up correctly cable replacement is easy. Get the cable on the pedal end first by lifting the pedal up and pushing the quadrant back to hook the cable on. Then get someone to hold the pedal up (or prop it up with a screwdiver if you are on your own) and get the gearbox end on last. Cheers Quote Link to comment Share on other sites More sharing options...
welshlad Posted November 28, 2017 Author Share Posted November 28, 2017 (edited) studabear that would be great, my wife is, dani hayes should be pics of or twin girls on profile pic Edited November 28, 2017 by welshlad Quote Link to comment Share on other sites More sharing options...
welshlad Posted January 28, 2018 Author Share Posted January 28, 2018 Im doing this tommorow if anyone has a pic or diagram please Quote Link to comment Share on other sites More sharing options...
Admin Ollie Posted January 30, 2018 Admin Share Posted January 30, 2018 All i can say is good luck ...there buggers to do :>( Quote Link to comment Share on other sites More sharing options...
welshlad Posted February 1, 2018 Author Share Posted February 1, 2018 didnt find the clip i lost but luckily theres a couple of peddle boxes on ebay, might be easier that way too lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.