Guest Ninjaj Posted June 12, 2013 Share Posted June 12, 2013 Hi, I'm new to the club, and wondered if anyone could help me with my problem! My 1990 XR3i EFi engine cuts out when I stop at junctions etc, it runs ok but when stopping the revs go right down though it starts immediately when i turn the key. Would appreciate your advice/comments. Cheers, Quote Link to comment Share on other sites More sharing options...
Admin Ollie Posted June 12, 2013 Admin Share Posted June 12, 2013 hello sounds like the idle speed control valve common problem with the efi :>( a good clean out with carb cleaner etc normally does the trick if not just buy one from ebay to try as you look at the engine compartment where the efi plenum is its just to the right let us now how you get on ollie Quote Link to comment Share on other sites More sharing options...
badger Posted June 12, 2013 Share Posted June 12, 2013 defo sounds like it. do as ollie says and all should be good Quote Link to comment Share on other sites More sharing options...
Guest Ninjaj Posted June 14, 2013 Share Posted June 14, 2013 Thanks for the advice I will try and let you know how I get on. Ninjaj Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.