Admin Ollie Posted February 22, 2011 Admin Share Posted February 22, 2011 hello need some help please i have fitted motors to both doors in my mk3 the c/l motors ...bearing in mind its delocked too r/y 12+ is this permanent live or switch ? brown earth yellow ? white ? these have come from a mk4 cabby so i have been told i dont need separate relays which wires do i need to connect up to the main wiring loom then i can deal with my alarm system not sure which one i am fitting yet the moss or scorpion thanks in advance ollie Quote Link to comment Share on other sites More sharing options...
Admin Paul Posted February 22, 2011 Admin Share Posted February 22, 2011 You will need the seperate Ford central locking loom to connect them mate. Much easier Quote Link to comment Share on other sites More sharing options...
Guest mossyxrt Posted February 22, 2011 Share Posted February 22, 2011 from what i remember, the yellow and white go to the control unit as they tell each unit what to do but im sure that you can connect them together, (yell to yell and white to white) then permanant pos and neg (use inline fuse). if your fitting alarm you need to see what signal the yell and white give out (think its a pos) for the type of alarm output to connect to them , hope this helps Quote Link to comment Share on other sites More sharing options...
Guest mossyxrt Posted February 22, 2011 Share Posted February 22, 2011 correction to my comment... dont think mk4 have a unit, i think there called the intelligent locking system, each motor controls the others, as said above connect all same colours together and then a pos and neg permanant feed to the red and black or brown with in line fuse Quote Link to comment Share on other sites More sharing options...
Admin Ollie Posted February 25, 2011 Author Admin Share Posted February 25, 2011 Thanks fellas Loom arrived today And hopefully this will help http://www.the12volt.com/installbay/alarmdetail/840.html Thanks ollie Quote Link to comment Share on other sites More sharing options...
iansoutham Posted April 5, 2011 Share Posted April 5, 2011 Ollie, the red/yellow is +12V, the brown is earth (connect to earth point by speakers, not inside the door), the yellow is lock, the white is unlock. Join the red/yellow together and connect to a +12V fused source, the whites together, the yellows together, and the browns to earthing points. They are that simple. If you have any problems, let me know and I will pop down and go through them with you. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.