Guest Cabbytech Posted February 25, 2010 Share Posted February 25, 2010 The time has come where my old exhaust has seen better days, so i decided to get a stainless one and came across this and just had to get it lol it looked a bit scabby at first, and i thought the tail pipe was damaged, but it wasnt, it just had a bit of mud on the end but after a bit of spit and polish it came up like new and is in great nick and this is one of my dogs Rio, keeping a close eye on what im doing from the back of my lads festa Quote Link to comment Share on other sites More sharing options...
Guest shaun Posted February 25, 2010 Share Posted February 25, 2010 like the dog house.... pmsl Looks as good as new good find m8 Quote Link to comment Share on other sites More sharing options...
LeeMcCarthy Posted February 25, 2010 Share Posted February 25, 2010 looks good mate, who needs alarms when you have one of them sitting in the back lol Quote Link to comment Share on other sites More sharing options...
gingergman Posted February 26, 2010 Share Posted February 26, 2010 good bit of cleaning work on the exhaust, come up like new, what did you use? and your dog is well nice mate love german shepards Quote Link to comment Share on other sites More sharing options...
Guest s11pyk Posted February 26, 2010 Share Posted February 26, 2010 yeah what did you use? iv got an ebay special magnex on its way to me and im sure its gonna need a clean. is autosol the future or what? Quote Link to comment Share on other sites More sharing options...
Guest Cabbytech Posted February 26, 2010 Share Posted February 26, 2010 I used some 320 grade DA discs, and then got my faithful buffer on the go with some T cut, and hey presto. It came up better than i thought it would. Thanks for the comment on my dog Rio, i have 3 others as well, Rio is the youngest one, Quote Link to comment Share on other sites More sharing options...
Guest wodge Posted February 27, 2010 Share Posted February 27, 2010 good find that! especially if it were cheap Quote Link to comment Share on other sites More sharing options...
gingergman Posted February 27, 2010 Share Posted February 27, 2010 shows a good bit of elbow grease is well worth it! power tools ease it ! id a love a dog like rio but a med-long haired one, my house aint big enough lol, Quote Link to comment Share on other sites More sharing options...
Guest Cabbytech Posted March 2, 2010 Share Posted March 2, 2010 Well i got round to fitting it today, was going to do it on saturday but didnt get the chance, the old one was deffo on its last legs and was blowing really bad where it goes into the backbox old mild steel v newer stainless one Quote Link to comment Share on other sites More sharing options...
Guest shaun Posted March 2, 2010 Share Posted March 2, 2010 looks very nice ....hope it sounds nice after all your hard work Quote Link to comment Share on other sites More sharing options...
LeeMcCarthy Posted March 2, 2010 Share Posted March 2, 2010 looks so much better mate Quote Link to comment Share on other sites More sharing options...
Guest Cabbytech Posted March 3, 2010 Share Posted March 3, 2010 Thanks guys, it deffo looks better, the other one actually snapped as i was taking it off. its blowing on the front joint so i will have to get some exhaust putty today to seal it and then i should be able to hear the exhaust lol. Quote Link to comment Share on other sites More sharing options...
gingergman Posted March 3, 2010 Share Posted March 3, 2010 looks great fitted id be well chuffed with that Quote Link to comment Share on other sites More sharing options...
Guest Cabbytech Posted March 3, 2010 Share Posted March 3, 2010 All sealed up now m8 and sounds sweet, not racerish so im well happy with it woo hoo Quote Link to comment Share on other sites More sharing options...
gingergman Posted March 3, 2010 Share Posted March 3, 2010 sweet mate, just a nice tone then! i dont like that gum gum stuff lol sits nice in your bumper too Quote Link to comment Share on other sites More sharing options...
Guest murcus Posted March 14, 2010 Share Posted March 14, 2010 itit might be that you just need an exhaust flange gasket Quote Link to comment Share on other sites More sharing options...
Guest danj8608 Posted March 19, 2010 Share Posted March 19, 2010 looks good matey, im fitting my magnex soon i may clean it up now iv seen yours Quote Link to comment Share on other sites More sharing options...
gingergman Posted March 19, 2010 Share Posted March 19, 2010 looks good matey, im fitting my magnex soon i may clean it up now iv seen yours you should mate, tony has shown that its well worth the effort! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.