Guest kevscabriolet Posted September 28, 2005 Share Posted September 28, 2005 Hi all. Just wonderin if anyone has come across a stupid little thing whilst installing a amplifier into a cab. Where the hell does the positive wire go?? ive fitted quite a few amps but not in a cab unfortunately now i want some serious sounds in the cab, i've looked for a hole under the bonnet and a grommet all usual places anyone got any ideas would be much appreciated. By the way its a M reg pre facelift mk5 1.8 si if this helps lol. Thanks everone Kev Link to comment Share on other sites More sharing options...
Guest Alan H Posted September 28, 2005 Share Posted September 28, 2005 you could go in with the speedo cable-its by the wiper motor Link to comment Share on other sites More sharing options...
Guest Keith Posted September 28, 2005 Share Posted September 28, 2005 Just drill a hole through, but make sure there is nothing the other side and you put a gromet round to seal it and stop the wire from rubbing, depends on the size of cable you are using Link to comment Share on other sites More sharing options...
Guest JAY.XR Posted February 21, 2006 Share Posted February 21, 2006 i alwayz take mine straight to the battery, Link to comment Share on other sites More sharing options...
Recommended Posts