Guest chucky dozza Posted December 9, 2013 Share Posted December 9, 2013 My spot lights are wired to main beam but dont work but mean beam does but the spot lights work when connec straight to a battery any ideas helpp please Quote Link to comment Share on other sites More sharing options...
Guest kenny stag Posted December 9, 2013 Share Posted December 9, 2013 You would be better to start again with the wiring, and fitting a relay to the spots,if you do not know how to do this, give me a shout. kenny Quote Link to comment Share on other sites More sharing options...
Guest chucky dozza Posted December 9, 2013 Share Posted December 9, 2013 The wireing looks like it was made that way as its all part of loom but the front fog switch on dash wires cut at back but the spots did work then stopped Quote Link to comment Share on other sites More sharing options...
Ian71 Posted December 9, 2013 Share Posted December 9, 2013 One of mine is like that check the earth Quote Link to comment Share on other sites More sharing options...
Guest chucky dozza Posted December 9, 2013 Share Posted December 9, 2013 What earth isit and I read another thread saying about relay fuse I fink theve chopped wires from switch and put to main beam one Quote Link to comment Share on other sites More sharing options...
Ian71 Posted December 9, 2013 Share Posted December 9, 2013 The front spots should only work when you go on to full beam. From memory there are only two wires going into each light. Check the conections for corrosion they get quite wet from vehicle spray and suffer from bad connections on the little connecter.Good luck. Quote Link to comment Share on other sites More sharing options...
Guest chucky dozza Posted December 9, 2013 Share Posted December 9, 2013 Ive cleaned all them up and sprayed with wd40 and still nout and crap with wireing side of stuff Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.