Guest CabbieNut Posted February 4, 2010 Share Posted February 4, 2010 Hi Guys I am in the process of wiring in a power roof into my latest mk4 cab, and cant find where the two black bullet connectors go(in thre back), as i know some have the wiring for them to plug into by the rear speaker pods but my one doesnt, so where do I have to wire them ? Cheers for any usefull info Quote Link to comment Share on other sites More sharing options...
Guest CabbieNut Posted February 7, 2010 Share Posted February 7, 2010 surely someone else has had this poblem before, are the wires just earths or are they a power feed of some sort ? Quote Link to comment Share on other sites More sharing options...
Guest CabbieNut Posted February 8, 2010 Share Posted February 8, 2010 Anyone ? Quote Link to comment Share on other sites More sharing options...
gingergman Posted February 8, 2010 Share Posted February 8, 2010 they wont be a power feed, if anything just a earth, but the connector on the pod, aint that bit just plastic? therefore would do nothing. i know what wires you mean mate, do the rest then try the roof, if it dont work and everything else is correct try grounding them then see. Quote Link to comment Share on other sites More sharing options...
Guest smoothy582 Posted February 8, 2010 Share Posted February 8, 2010 if its the ones i thinking of they go to either speaker pod to the underside of the poppers for the cover Quote Link to comment Share on other sites More sharing options...
Guest shaun Posted February 9, 2010 Share Posted February 9, 2010 Hi cabbienutter there is a wireing diagram on this site for the eletric roof some were have a look about if i find them will post it for you other than that ask PAUL were it been moved to... Quote Link to comment Share on other sites More sharing options...
Guest CabbieNut Posted February 9, 2010 Share Posted February 9, 2010 thanks guys ive searched the other day and found the wiring diagram but it didn't show the connectors, the connectors are the ones hagondas mentiond in his post about identifying wiring plugs Quote Link to comment Share on other sites More sharing options...
Guest shaun Posted February 9, 2010 Share Posted February 9, 2010 (edited) other than that send richie29gt a pm he just fitted eletric roof wiring Edited February 9, 2010 by shaun Quote Link to comment Share on other sites More sharing options...
Guest Cabbytech Posted February 9, 2010 Share Posted February 9, 2010 Black wires m8, equal earths.. Quote Link to comment Share on other sites More sharing options...
Admin Paul Posted February 9, 2010 Admin Share Posted February 9, 2010 The 2 black wires in question go to the speaker pods. They connect to the press stud on either side. On some later covers there is a wire that runs through the cover and is a safety devive. When cover is in place it shorts these wires and disabling the motor. Do not just put them down to ground as this will isolate the pump. Paul Quote Link to comment Share on other sites More sharing options...
gingergman Posted February 9, 2010 Share Posted February 9, 2010 if you need the other half of the bullet connectors to attatch to the speaker pod in your wireing ive got two id send ya for just postage cost, obviously its easy enuf to make a connector yourself but you mite want proper ford ones lol, Quote Link to comment Share on other sites More sharing options...
Guest CabbieNut Posted February 9, 2010 Share Posted February 9, 2010 well ive connected everything else up but all im getting is clicking from both lots of relays, could this mean the pump is dead ? Quote Link to comment Share on other sites More sharing options...
Admin Paul Posted February 9, 2010 Admin Share Posted February 9, 2010 if you need the other half of the bullet connectors to attatch to the speaker pod in your wireing ive got two id send ya for just postage cost, obviously its easy enuf to make a connector yourself but you mite want proper ford ones lol, I would take a couple of you, never connected mine but would Quote Link to comment Share on other sites More sharing options...
gingergman Posted February 9, 2010 Share Posted February 9, 2010 I would take a couple of you, never connected mine but would sure mate, pm me your address, dont worry about postage as you sorted me out with the crimbo cards lol! Quote Link to comment Share on other sites More sharing options...
Guest CabbieNut Posted February 11, 2010 Share Posted February 11, 2010 so does anyone have any ideas why all im getting is clicking from the relays when i try to use the power roof ? Quote Link to comment Share on other sites More sharing options...
gingergman Posted February 22, 2010 Share Posted February 22, 2010 i dnno mate, mine has always done the same, in the end i got bored tryin to fix it lol i know this post dont help ya but its a free BUMP anyway! Quote Link to comment Share on other sites More sharing options...
Jase foxall Posted June 20, 2018 Share Posted June 20, 2018 I'm getting same I've got power to plug that connects to the pump but both relays are just clicking changed relays still the same pump works fine when connected to another 12v source Quote Link to comment Share on other sites More sharing options...
Chris M Posted August 5, 2018 Share Posted August 5, 2018 Did you ever get this sorted? My roof also doesn’t work. The relays click but no power to the pump conector. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.