Guest mad4fords666 Posted July 31, 2013 Share Posted July 31, 2013 hi all i have a p reg mk6 escort cabby ghia its currently a 1.8 zetec it origanally had egr valves in the exhaust manifold well i think there called that so dont hold me to it:) i started by getting rid of the exhaust manifold/cat convertor as the cat and manifold was one whole unit i had to also get shut of the inlet manifold as the vacum pipes were attached to each manifold. i changed these to a plastic inlet which was blocked off unlike the original and separate exhaust manifold and downpipe with cat from a mk6 1.8 si hatchback, so now the cat is located under the car rather than behind the radiater. i then planned on changing to a 2.0 silvertop zetec engine but ive noticed that the ecu from a 2.0 zetec will not fit my ecu plug as ive got 104 pins and not the 60 pin ecu plug.. will i need to change the full loom to accept the correct 60 pin ecu or change certain parts of the wiring loom? im puzzled :-/ could someone please help me thanks all Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.