Guest tbirdbooboo Posted February 1, 2012 Share Posted February 1, 2012 Hi guys well my rs1600i clocks i won off ebay for £15 arrived today so when i get a chance am going to fit them in my mk3 cab but im just wondering ... Will it work as its got the groovy lights h wiring and im not sure if my motor has the plug for them. If there is no plug what should i do: my mate is phenominal with wiring if we need to make something . Just want a heads up incase i need to specificly need to do something to make these work. Quote Link to comment Share on other sites More sharing options...
Guest tbirdbooboo Posted February 1, 2012 Share Posted February 1, 2012 Dam sometimes a re read my posts and they nearly dont make sence lol.... Sorry lol Quote Link to comment Share on other sites More sharing options...
MarineIguana Posted February 2, 2012 Share Posted February 2, 2012 No reason why they shouldn't work unless your current ones don't have a rev counter. Quote Link to comment Share on other sites More sharing options...
Guest tbirdbooboo Posted February 2, 2012 Share Posted February 2, 2012 Cool . Will i have the plug though for the little lights Quote Link to comment Share on other sites More sharing options...
MarineIguana Posted February 2, 2012 Share Posted February 2, 2012 If its just had its bulbs replaced then you should have all the right connections already. Quote Link to comment Share on other sites More sharing options...
Guest tbirdbooboo Posted February 3, 2012 Share Posted February 3, 2012 well i tried today and there is a 3 pin plug on the clocks above the speedo which is for the 2 little shift lights - i dont seem to have the wiring for them. any ideas where these wires would go? would it be from the gearbox? Quote Link to comment Share on other sites More sharing options...
Guest tbirdbooboo Posted February 4, 2012 Share Posted February 4, 2012 Well looks like im scrapping this idea as it turns out you need to be running the twin coil setup and the ecu to make the two lights work. Nightmare lol. Took a lot of searching online to find this out and was gutted. Had all the rev guage apart trying to figure out if i can make some sort of switch so it lights the green light at 4500k and the red one at about 5500k but i cant do it so going to leave it for the min. Might try a micro switch but not sure yet. Oh well lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.