Guest fasteddy Posted July 19, 2010 Share Posted July 19, 2010 My blower motor isnt working on any speed the motor and resistor have been changed still no joy. I think I have traced the problem to the fuse box as the blower fuse connection is burnt out in the fusebox There is also a broken wire. Im planning on running some new wires through but dont know where the wires run to and from the fusebox. Does anybody know if this is an easy job or would it be best left to a pro? Quote Link to comment Share on other sites More sharing options...
allblue Posted July 19, 2010 Share Posted July 19, 2010 (edited) look up my post on repairing fusebox in the tutorials section. for the price of a soldering iron and solder you can tackle this yourself Edited July 19, 2010 by allblue Quote Link to comment Share on other sites More sharing options...
Guest fasteddy Posted July 19, 2010 Share Posted July 19, 2010 Cheers m8 Quote Link to comment Share on other sites More sharing options...
allblue Posted July 21, 2010 Share Posted July 21, 2010 No probs , let us know how you get on. Just remember to take a photo of the fusebox so you know where the fuses and links need to go when refitting the box. Also check each and every solder joint on the board. Look for any faint black cracks and apply new solder to these joints. There is also a post in the tutorials section on soldering tips which may come in handy. Quote Link to comment Share on other sites More sharing options...
Guest fasteddy Posted July 21, 2010 Share Posted July 21, 2010 blower is now working. Must admit i was a bit worried when the fuse box was all in pieces lol. Only thing now is i have noticed my rear fog light isnt working so now i need to sort that out aswell. Oh the joys of owning an old Ford lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.