woodspeedcreations
-
Posts
23 -
Joined
-
Last visited
Content Type
Calendar
Downloads
Profiles
Forums
Gallery
Tutorials
Collections
Posts posted by woodspeedcreations
-
-
Hi guys love the more door should look good with the wheels any way why dont you buy a stud conversion kit then you can use any standard alloy wheel nuts from mondeo/sierra/ mk5/6 escort we have used them loads and not had any problems
-
Hi there has any one tried a old sock full of cat litter just leave it on the dash and change it when i gets damp it works on mine as it absorbes the moisture in the air
-
bumper paint does a good job on them and is hard wearing
-
Hi mate yes mk3's do have the pink relay under the dash same as mk 4's do my wife has a mk3 tin top 3i and its got one
-
Hi mate fuel pump relay is under the dash near the steering column its the pink one you want
-
Hi mate have you got all the wires on the battery ie the normal leads and the small wire on the +treminal as well
-
ok mate i know what ford are like but we have no option i know a bit about these and have played with a few and cant find away round the immobiliser as it is built into the ecu and the external feeds aint 12 volt
-
Hi mate the immobiliser stops the fuel pump and the spark /ignition the engine will still turn over the immobiliser is built into the ecu that is what makes me think that you must have chipped keys have had this problem be for on a late mk5a as near the model change to mk6 some did have the pats system fitted to them
Near the ecu in the passenger footwell the is a test plug try a code reader of get a ford dealer to see what fault shows up the one i know about had a faulty key reader on the ignition lock this was replaced and the codes rest by ford and it was ok as for removing the immobiliser ask ford or a ecu specialist hope this is of some help to you
-
Hi mate just a thought the inertia switch in the drivers side foot well behind the kick panel has not tripped off has it know this to happen on mk5's though slamming the door shut worth checking
-
Hi mate has it got the pats imobillizer fitted with the chipped keys if it is it sounds like it has got imobillizer failure as this stops the fuel pump and spark
-
Hi your car has not got pats fitted you mentioned pats with your engine take it its from a mk6 or mk2 mondeo you can put it in your car using your loom and other parts and it will run you need the none pats type early 1.8 ecu to get the most from it
-
The pats system is a pain me and my son did one on his mk4 escort van finished up converting the escort mk6 loom to fit it now runs using all the mk6 injection /ignition system and it goes like stink still has working pats alarm/imobiliser as well you need the loom including the the keys/key reader from the ignition switch and dash clock as the pats needs to see the led it has built in it
Or you can fit the engine in your car using your loom and bits it will run but you will need a early none pats ecu to get the correct power from it
-
-
Hi mate done several conversons using the mondeo 2.0 engine you need to change the sump and oil pick up pipe for the escort one also the water pump as the mondeo pump works bacwards as well as the mounts exhaust manifold and down pipe put it in plug it in change the ecu and away you go but make sure you use the mk1 mondeo none pats parts
-
Hi all the fabricator guy took all the measurements and pics for the sills he reckons they should not be to difficult to makeup and hes going to let me know later on so fingers crossed
-
thanks for the contacts tried them both they do them for saloon and van but not the cabriolet and they are a different shape
-
I cut patched the sills on my mk5 escort dash 3 years ago looking tatty again now I spoke to a fabrication man yesterday and he thinks it would not to difficult to make some up any way he is coming round to have a look at them and measure them up as i could do with 2 pairs a pair for the dash and a pair for my new project a 73 silhouette will let every one know the outcome
-
Hi any one know if there is anywhere that supplies outer sills for the mk5/6 escort cabriolet
-
Hi all home from hospital yesterday after knee replacement will add some pics of my cars as soon as i can walk again
-
Hi ian i will try to tomorrow ok
-
woodspeedcre... : (13 June 2014 - 10:28 AM)Hi to every one in the club thanks for the welcome paul just to let every one know i've been around fords for years and along with my sons who are also into fords[ mk4 escorts] in various forms i presently own a mk5 escort dash [the last 7years] a mk5a escort silhouette found in a field an saved from scrap paid £80 2 weeks ago it needs some work but it runs and drives and it is suprisingly rot free but scruffy this also came with a heavy crash damaged mk5a si that i've also had running my son wants the engine to puy in his mk4 van regards woodspeed creations
-
woodspeedcre... : (13 June 2014 - 10:28 AM)Hi to every one in the club thanks for the welcome paul just to let every one know i've been around fords for years and along with my sons who are also into fords[ mk4 escorts] in various forms i presently own a mk5 escort dash [the last 7years] a mk5a escort silhouette found in a field an saved from scrap paid £80 2 weeks ago it needs some work but it runs and drives and it is suprisingly rot free but scruffy this also came with a heavy crash damaged mk5a si that i've also had running my son wants the engine to puy in his mk4 van regards woodspeed creations
Doors
in Bodywork Problems
Posted