-
Posts
168 -
Joined
-
Last visited
Content Type
Calendar
Downloads
Profiles
Forums
Gallery
Tutorials
Collections
Posts posted by jinks
-
-
hi chap i tried to get one but unable to trw dont make them no more so i taking them of and putting new pipes on and going to put adjustable bias valves in line with the pipes then take to mates garage and adjust the valves on his rollers job done
-
has it got efi on inlet manifold
or load of red fuel pipes ever were
-
is it mfi or efi chap
-
hotels for me lads lol
-
enjoy chap if you got a wife drop her a few quid to go shopping and you crack on with the car worked for me but now i doing xr2 she want double lol
-
och not good mate
-
take seat out lie on your back take a pic of the pedal assy and make shore the spacer go back in the right place also put someting soft to lie on you going to need it lol pig of a job enjoy
-
use multi meter to test
-
just spoken to mate said check the cold starter solenoid might be stuck think it on the inlet
-
check your air pipes might be sucking in air that will cause high revs mate look at the vacuum pipe from service to manifold
-
hi jon not to shore with mfi not big fan they have problems with the metering unit mine efi some one befor me had drilled out the tps sensor on throtle body so it would tick over high , check the flap on it
-
should just be able to change the cv not all the drive shaft its more likely it the outer cv held on by serclip
-
hi chap you got efi or mfi cheers john
-
if so clean the icv they get chocked up also look at fuel pipes there not squashed can you smell on fuel when on idle with the bonnet up and running
-
is it efi chap
-
fuel starvation
-
hi all has any one resealed load valves on the rear mk4 escort if not were can i get some cheep lol
-
also heater matrix u/s air in system check if water is circulating
-
is the bottom hose getting hot also feel top and bottom of the rad might be blocked
-
is your icv the one on the side of the inlet or sits on the iner wing
-
keep at it mate I got to change my flexs if still grap will do callipers lol . picked up wheels got them home 2 of them are mk1 so sell them on they rear lmao .p.s to clod to mess now
-
clean throttle body could be sticking loob up the acc linkage as well if not ok then possible tps sensor regards john
-
hi paul how you get on
-
me to fix all the cars but not now doing my own thing the problem I have is a hard pedal on my cab and not quite locking up but since I adjusted the rod I have left side locking up so think I change callipers , trying to do my xr2 front end rebuild and engine not took the rest of body kit off yet opps so might need sills lol wife not to please just got my hands on some pepper pots £30.50p lol pick up from stoke . some one might have change the servo befor on your motor ,there is two different one I just found that out lol none abs servo wont fit abs master not happy
Stone Chip
in Bodywork Modifications
Posted
hi any one no about painting stone chip i have an engine bay to pay and i useing paintable stone chip . do you have to paint it straight away after applied the stone chip or can I paint it a week later any info would be grateful cheers