Paul

Ok brakes bleed, still feel a little spongy but may need beeding in. Mot today so will let you know how it goes. Paul

No all pumps are in the boot

Ok hoses arrived and fitted, just need a hand to bleed the brakes and all should be good. Paul

I was hoping today but not arrived maybe tommorow Paul

If its the front ones they will need replacing, only the rear one will tighten with the hub nut

Just a quick update, Changed the cross over and added a AS manifold heat shield. Just waiting for brakes hoses to arrive and then off to MOT centre

Theres a roof ford service manual in the downloads section

Going to pop round in a while so look out for some more pictures later............

Looking goooooooooooooooooooooooooood

any roof supplier will supply the tension wires,

Theres more than 2 lol,

BIG GAY IS YOU PLEASE!!

any more pics mate, We will have this back on its feet come the weekend!!!!!

Just ordered some goodridge hoses for the front so should have some brakes in a week or so

Ok guys sorry for the total lack of updates but have been very busy at work and with the club. But have still been working on the car. Well it started off has a winter project but its now May but hopefully the end is in sight, I hope so because no got no more money to spend on it. Anyway heres a quick update. Airtec Radiator, Intercooler, Turbo cooler in place. Had to cut the bumper out a little for the twin fans Rest of engine built up with some shinny bits Just awaiting a polished Fiesta turbo cross over and i can get rid of the bodge pipework to the Idle control valve, A full Magnex exhaust as been fitted. I started the car up a few weeks back and it starts first click every time so all good. The only thing left to do is to fit some new braided hoses to these Sierra 4x4 calipers that i have fitted together with Sierra 2 wheel drive EBC discs. Fill with fluid and bleed the buggers. The calipers have been refurbed by Big Red Brakes Any way i will update you soon!!!! Paul

LOL, No problems mate. It was nice and tight just how i like em.

Edis lives in the engine bay on N/S inner wing Paul

You can take a wire from the edis unit directly to the rev counter, will try and find which colour you need

No problems mate, we will have it in the bay next wekend

Can someone let me have pics please

The MK3 and MK4 are the same covers

Can some one tell me where all the earth points are on a MK4 CVH engine bay?

Ok, went back to this problem. If i put a piece of wire between housing and good earth battery light comes on. This would indicate the alternater is not earthed very good to the body and after several start ups of the car the battery is dead so would also indicate that it requires a earth to charge the battery. Would i be right?? It appears that the alternator gets its -ve from teh bracket bolted onto the engine block? or does it have a seperate earth wire? I think the problem is the bracket and heat sheild are powder coated and i think this is the problem. Can i take a -ve from the alternator directly to the body if so what guage wire? Paul

Your the man, you might want to pin it egg

all efi are in the tank mfi bolted underneath