Guest Rogue Posted April 9, 2008 Share Posted April 9, 2008 i have just had a new engine put into my k reg cabby. The engine turns over but it has no spark every thing was sparking when the old one was in but the bottom end was lockrd up does anyone know what the problem maybe? Please help i really want her back on the road Link to comment Share on other sites More sharing options...
f40 cab Posted April 9, 2008 Share Posted April 9, 2008 i know it sounds stupid and doesnt really help but you need to start from plugs and work way back, might be ht leads wrong way round, or somthing like the crank sensor wire not connected. what engine have you fitted was it straight swap or have you gone up in size.? Link to comment Share on other sites More sharing options...
Guest Rogue Posted April 10, 2008 Share Posted April 10, 2008 i know it sounds stupid and doesnt really help but you need to start from plugs and work way back, might be ht leads wrong way round, or somthing like the crank sensor wire not connected. what engine have you fitted was it straight swap or have you gone up in size.? thanks for the help it was a straight swap the ht leads are new as is the coil pack but we have had a lot of problems will check all the leads again and renew the plugs too. Fingers crossed i will be able to get to some meets this year and enjoy the summer in a decent car for a change Link to comment Share on other sites More sharing options...
Recommended Posts