Guest Jay Parrish Posted April 4, 2012 Share Posted April 4, 2012 (edited) hi all i have an xr3i efi cvh 1.6 car did rev to 1000rpm all the time so put other idle valve on but not same code.. now rpm is 8000 standing but one,s the car gets warm driving it starts to judder even going slow as if i have a miss fire if i take my boot of the pedal no judder ????? Edited April 4, 2012 by Jay Parrish Quote Link to comment Share on other sites More sharing options...
RScab Posted April 4, 2012 Share Posted April 4, 2012 Jay u need 2 replace the original part with another with the same part number m8 then try it Quote Link to comment Share on other sites More sharing options...
Guest Jay Parrish Posted April 4, 2012 Share Posted April 4, 2012 (edited) ok thanks is this why i get the judder as the old idle i did take of would rev to 1000rpm but still drive with out a judder but would pull.. i got told that i had a miss fire but i had the idle valve with the non maching code on ?? Edited April 4, 2012 by Jay Parrish Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.