Guest markini5 Posted February 4, 2010 Share Posted February 4, 2010 hi all, does anyone know how correctly wire in separate oil and water temp gauges, their are 1 wire from each that go some where then 3 other to light up. also boost gauge shall i just use a tee piece from dumpvalve . thanks Quote Link to comment Share on other sites More sharing options...
Guest markeyboy Posted February 4, 2010 Share Posted February 4, 2010 with the pods, one wire will go from the pod to a sender unit located either in a water or oil way. the other 3 wires, one will be an earth one will be a live supply (usually tapped into a feed which is live when the ignition is on) and the other should be illumination cant help with the dump valve im afraid Quote Link to comment Share on other sites More sharing options...
Guest Cabbytech Posted February 5, 2010 Share Posted February 5, 2010 I agree with Markeyboy regarding the wiring, and for the boost gauge, a tee or Y connector piece in the dump valve pipe should be fine. Fit something of a decent quality though. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.