Guest Glenn65 Posted August 9, 2016 Share Posted August 9, 2016 Ok folks, I fitted Spax adjustables last summer, but with my street being full of speed humps, I want to put my car back to standard ride height. It's a basic GL, NOT XR or injection, does anyone know where I can source standard springs and shocks for it Link to comment Share on other sites More sharing options...
Guest nicholas huntley Posted August 11, 2016 Share Posted August 11, 2016 Just discovered something, if you need to replace front lower suspension arms, throw your Haynes manual into the bottom drawer! First side I did as recommended, took over an hour. Other side, drive car one side up on the curb, other side drive onto builders concrete block or similar so that car is level side to side. Take out two bolts then ball joint at wheel end. Pull out the worn arm, replace with a new one. Tighten everything up. All done and dusted, 20 to 25 mins! You might email www.motorparts.ie and enquire about the shocks/springs you need, they are very helpful. Good Luck, Nick. Link to comment Share on other sites More sharing options...
Guest Glenn65 Posted August 11, 2016 Share Posted August 11, 2016 Tried them and unfortunately they can't source anything Does anyone know if mk4 springs or shocks/struts fit the mk3 Link to comment Share on other sites More sharing options...
Recommended Posts