Jump to content
Escort Cabriolet Club

Vincygav

Forum Members
  • Posts

    418
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Vincygav

  1. I did not realise people still did this, I thought that style was long gone. It still looks good, must have taken ages to do as I remember it was hard for a friend doing it to a more flat shaped mk4 Escort bonnet.
  2. I think you mean QH 'Quintin Hazell' and aparently there ones are not better than the genuine Ford ones. Even in the motor trade they would advise you to get the genuine Ford wishbones 'lower arms' aas many other makes just do not last. The best ones are the heavy duty genuine Ford lower arms for the mk5 Escort van, often refered to as Royal Mail versions. They cost around near £90 though.
  3. The are very few mk5 Escort's with aircon. It was optional. So even finding one to break with the components is very hard.
  4. Vincygav

    Electric Hood

    I have never seen pump repair caps for the VW,where have you seen them? My Tigerseal idea didnt work either - I bloody give up with the thing now.
  5. Should be in the back of the Haynes manual
  6. I have done this to my Orion from 1.6 cvh which was harder. But much easier when I did it to my Escort convertable as it was the Si with 130 zetec engine and the majority of it is the same as the RS2k. To convert Si 130, all you need is the engine, ecu, fusebox, exhaust manifold, n/s engine loom coming from the ecu, o/s engine loom coming from the fusebox, throttle cable, offside engine mount the others are the same as zetec, radiator hose that is near the alternator. If you are going to use the ABS setup, then you need the RS2k abs sensors, brake pipes, master cylinder and servo, abs control unit and abs pump under the servo. You could have get a second hand throttle cable steve for cheap from CR Spares (JD Motorsport), they do a lot of RS2000 mk5/6 partsas they are a specialist breakers for them.
  7. Vincygav

    Electric Hood

    I am really suprised all these years no one has come up with a replacement. They surely must be plenty of them cracked, because I had it crack on 2 different covers I bought. I remember someone posted a link here some years ago to a metal one but was at a steep price of £50 excluding postage. Worst thing about metal you cannot see the level you are meant to fill it up with. Surely someone on this group must work with someone who does plastics or vacuum forming and could get a set made. I had try everything on mine in the past 3 years of owning my cabby. Adralite - never worked, superglue - 100% useless didnt work, gasket sealant - only lasted for a few weeks, candlewax - didnt work. I have now resorted to Tiger Seal PU Adhesive sealant. Panel glue for cars. Hopefully it would work, did it yesterday, so would fill it up with fluid today and see if it would still leak. I really would like a new pump cover, as it has put me off putting my roof down as I rather press a button to put it up and down, rather than manually which I am lazy to do.
  8. The coolant temp sensor guage has gone. It is on the cooling hose. Could be you need new spark plugs why you have trouble to start it when the engine is hot.
  9. A real shame the recession has got hold of them. They made a lot of cabriolet designs for various manufacturers, you can see it here http://www.karmann.com/__C1256DF700512B86....050041957d.html
  10. Also make sure you have the correct fan control switch and voltage is supplied to its circuit.
  11. LOOOOOOOOOOOL, some very harsh tools (hack saw & breaker bar) to be using on rusty nuts - sorry couldnt help that one. I would have thought heat (blow torch) and lubrication would have done the trick
  12. The RS2k/XR3i rear disc brake shoes have been discontinued as you have said. I think one manufacturer makes them, cant remember, but ti would be a long search on google. Your easiest bet is to get them relined by a brake relining specialist or buy some used ones from JD motorsport. They very rarely wear down and is part the reason why Ford discontinued them. Unless the person was driving with the handbrake on partially or doing handbrake skid turns!!
  13. Would the track rod ends also make a difference?
  14. I realised the morning after I posted this it had something to do with the glovebox. It was when I overstuffed the glovebox with stuff and force closed it. I guess this then pushed the hinges off the lid. So I now need to snap the hinges back onto the lid. I drove to work that morning with the glovebox opened and no noise. I realised the relay had something to do with the alarm system when it made the alarm horn go off. I have closed the glovebox more better, although the bottom of the lid makes it swing just a lil when the car moves hence making the relay buzz. So now I have a day off today, I would sort it out.
  15. The ignition leads, if you havent changed them; as they likely would have been covered in oil, and possibly it may be worth changing you coil pack.
  16. My car keeps making a funny shorting/buzzing type sound. It happens when the ignition/engine is on and mostly sounds when moving off or turning. Under investigation, I found it to be a relay as the sound was coming from behind the dash. I removed the clocks and drove a little and then could feel the relay making the noise when I touched it. I then took it out and push it back in fully, but it still is doing the same thing. Although one thing is I took it out and touched the pins on it 3 times and it appeared to have made the Ford alarm horn beep a couple times. I have checked the wiring diagrams in the back of the Haynes and could not see where it is or what it is for. Is it distinctive to the cabriolet? It is clipped behind the dashboard in the location in the picture, I unclipped it so you could see around where it is clipped. The wire then goes along other looms under the near the steering column. It is a 5 pin relay, part V91AB-L13A025-AA (12v 40/35A) wires to the pins are; pin 86 = red thick wire pin 30 = brown/yellow pin 87 = nothing pin 87a = brown pin 85 = brown/red and brown/green
  17. It should be the one that is the hazard light triangle circuit.
  18. Yea I realised when I got the kit it was hi/low, but got it for £49 so not a bad price. Getting the new style LED for my sidelights the flat hi power led which is smaller and brighter than the outgoing multi LED sidelight bulb.
  19. The system you talk about is on BMW and a few other convertables, when you open the door it would lower the window by 5 mm automatically. when the door is closed fully after 3 seconds, the window would raise up that extra 5mm to create a perfect seal. Do they have a special relay to do this?
  20. They used to be on ebay a lot. if you put a search in for 'escort electric window'
  21. The starter inhibitor may well be a relay.
  22. Or could be the spark plugs
×
×
  • Create New...