zygott Posted June 10, 2017 Share Posted June 10, 2017 i had an electrical short, burnt most of the loom. got a fiesta ofac loom, joined the 7 wires to the main loom in the cabby, (efi so fairly easy job). now it runs, but if i press the accelerator all the way in it stalls, it wont rev over about 2000 rpm, if i pump the accelerator i can get it up to about 3k. any idea what is going on? was running great before the short. Quote Link to comment Share on other sites More sharing options...
zygott Posted June 10, 2017 Author Share Posted June 10, 2017 all sorted. for some reason pins 8 and 27 where in the wrong place, they were set up for xr2i/xr3i and not turbo! moved them and it all good Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.