Jump to content
Escort Cabriolet Club

f40 cab

Forum Members
  • Posts

    156
  • Joined

  • Last visited

Everything posted by f40 cab

  1. I've got 3 wheel arches. But need to know if front or rear? Is there a difference pictures all look like there the same.
  2. are they not on the lid of fuse box ive got aa mk4 and thats where they are , have you looked in haynes manual they have diagrams aswell.
  3. Good old cab club full.of answers.
  4. Hi I've got mk4 cab 1990 efi what colour is the fuel pump relay. Yellow or red? Thanks.
  5. Hi just need some help with adjusting co2 potentiometer on efi. I've had multimeter on it and I know it works. But when adjusting it the exhaust co2 gas won't change on gas reader. Does it need to be plugged in to diagnostic reader to adjust. Or should it make a difference straight away.
  6. Nobody got a mk5 escort?
  7. Where you based? Start at bottom work your way up. Battery. Fuse ox wires. Bulbs.
  8. Anyone got mk5 escort 1.8.
  9. Hi everyone. On mk5 escort 1.8 the two pipes that come out the efi intake manifold where do they go. It's the 2 vacume pipes next to intake temp sensor on underside.of efi intake.
  10. Hi fitted my 2.0 silvertop I to my efi mk4. But having trouble with alternator fitting. Using mk4 efi 1.6 bracket and alternator but seems to foul the water pump exit. What are people using. Hoses what are we using. And inlet /air pipes I've got xr2i inlet on what are people using for the intake pipes as mine sits to high and hits bonnet.
  11. Hi fitted my 2.0 silvertop I to my efi mk4. But having trouble with alternator fitting. Using mk4 efi 1.6 bracket and alternator but seems to foul the water pump exit. What are people using. Hoses what are we using. And inlet /air pipes I've got xr2i inlet on what are people using for the intake pipes as mine sits to high and hits bonnet.
  12. Hi fitted 2.0 in my cab. Need help on ecu/wiring side of things. Got a DEWY ecu and loom. Whats the.difference between the MAF sensors housing. Are they the same just bigger housing? Any help.advise on wiring would be appreaciated.
  13. Is it not just internal fuel pump (efi) external pump (mfi)?
  14. I'll have a look tomorrow. Been baffling me for a bit now.lol hopefully sort it. Thank you.
  15. Hi just built my zetec silvertop. Tring set up the timing. Cant seem to sort cams out got the flat bar tool but wont sit in cams the cam slots are lower than top of head. Any one done the timing on a 1.8 silvertop.
  16. Hi just built my zetec silvertop. Tring set up the timing. Cant seem to sort cams out got the flat bar tool but wont sit in cams the cam slots are lower than top of head. Any one done the timing on a 1.8 silvertop.
  17. Just had a look mate it goes along the passenger side wiring loom not sure where to with out removing dash. But there is a thick brown wire behind passenger speaker pod for the doors.
  18. Long shot has anyone got a Clifford concept 600 remote start on there car. Can't remember which buttons to set it up.
  19. Wish I'd seen this earlier just put my clocks and dash back in. Lol. Are you still stuck with it? Or sorted.
  20. A lot more sensors on it that I don't need not sure if it will effect running if I don't connect sensors.
  21. Ok thank you. I've got xr2i ecu and 2.0 mondeo. So trying to find best combination.
×
×
  • Create New...